Monday, December 23, 2019
McCalls 7596, My Artsy Caftan
What, a blog post? I'm not sure I remember how to do this, but this garment felt like it deserved more attention than a little old Instagram post would give it. This piece feels very special and like a fully formed expression of my creative pursuit. I dyed the rayon challis last year with my mom. I intended it for a maxi shirt dress but it just felt too loud for a full body covering. When we were planning our camping trip to Santa Fe this Fall I decided I needed a last minute swim cover up and this one came together quite quickly. I finished everything but hand stitching the facing before our trip and took my needle and thread along to do that at camp. I had grand notions of photographing this at Ojo Caliente hot springs in front of some gorgeous red rocks, wouldn't that have been stunning?! Well, we didn't make it to Ojo and the hand stitching only recently got completed at home. Good news is this is a perfect house dress, swim cover up and might possibly even get worn out as a dress at some point. And, I love this thing so much! I love the way the simple silhouette drapes so elegantly, especially in these divine fabrics.
I made a size Small and the pattern is Mccalls 7596. The rayon challis is from Dharma Trading, the Cedarwood Safia Twill is from Matchpoint fabric (I may have to order some more of that one) and the teal rayon linen blend is leftover from my Alice Top. The only modification that I made was re-drafting the front curved yoke to allow for color blocking. This pattern is super easy and comes together very quickly, I highly recommend it!
Tuesday, April 16, 2019
Vintage Simplicity 7006
I was inspired by the Sew Bibs Challenge over on Instagram last month. I surprised myself and finished this pair of overalls on the very last day of the challenge.
Can you tell I'm super proud of these?!
The fit is excellent, they are comfy and the style ticks all my boxes: simple, vintage yet modern, lots of buttons and top stitching. Nothing to not love here.
I do need help when it comes to booty pocket placement. I messed these up the first time and still not sure they are quite even. How, oh how do you get your pockets to be both the exact same size, and placed evenly on your booty?! Help!
I was surprised how easy it was to fit this pattern, considering it is a Misses 9 & 11. I muslined it and only had to add 1/4" to each side seam from the waist down to the hips. I added to the bib pieces to match this as well. I did my typical round pubis and low butt adjustments. Plus I learned a new to me full front thigh adjustment. I added 3/4" to the crotch at the front inseam and removed 1/2" from the crotch at the back inseam. This gives the full front thigh more room without making the crotch length too long. You can see a diagram of what I did here where it says add for full thighs.
I used the pockets from this vintage pattern McCalls 4849, view B
The mystery fabric for these overalls came from one of the tablecloths that my mom made me for my booth when I made jewelry. I believe it is a Tencel Twill that she got at a warehouse fabric store on Harry Hines in Dallas for probably $1 a yard. How is that for thrifty?
Pattern: Simplicity 7006 from 1975
Size: misses 11
Alterations: Added 1/4" to sides from bib down through hip
Added butt pockets from McCalls 4849
Left off front bib pocket
Used buttons instead of overall buckles
Low butt, round pubis adjustment
Full front thigh adjustment
My Measurements: Bust 34"
Waist 26"
Hips 39"
As I say with every pair of pants I make, these are the best fitting pants I have made so far. With this pair I think I have truly made wearable pants that I would not change. This is a years in the making, huge deal for me. I am thrilled. I definitely plan to use this pattern again and again. I want to make a shorts version as well as using the pants only without the bibs.
Can you tell I'm super proud of these?!
The fit is excellent, they are comfy and the style ticks all my boxes: simple, vintage yet modern, lots of buttons and top stitching. Nothing to not love here.
I do need help when it comes to booty pocket placement. I messed these up the first time and still not sure they are quite even. How, oh how do you get your pockets to be both the exact same size, and placed evenly on your booty?! Help!
I was surprised how easy it was to fit this pattern, considering it is a Misses 9 & 11. I muslined it and only had to add 1/4" to each side seam from the waist down to the hips. I added to the bib pieces to match this as well. I did my typical round pubis and low butt adjustments. Plus I learned a new to me full front thigh adjustment. I added 3/4" to the crotch at the front inseam and removed 1/2" from the crotch at the back inseam. This gives the full front thigh more room without making the crotch length too long. You can see a diagram of what I did here where it says add for full thighs.
I used the pockets from this vintage pattern McCalls 4849, view B
The mystery fabric for these overalls came from one of the tablecloths that my mom made me for my booth when I made jewelry. I believe it is a Tencel Twill that she got at a warehouse fabric store on Harry Hines in Dallas for probably $1 a yard. How is that for thrifty?
Pattern: Simplicity 7006 from 1975
Size: misses 11
Alterations: Added 1/4" to sides from bib down through hip
Added butt pockets from McCalls 4849
Left off front bib pocket
Used buttons instead of overall buckles
Low butt, round pubis adjustment
Full front thigh adjustment
My Measurements: Bust 34"
Waist 26"
Hips 39"
As I say with every pair of pants I make, these are the best fitting pants I have made so far. With this pair I think I have truly made wearable pants that I would not change. This is a years in the making, huge deal for me. I am thrilled. I definitely plan to use this pattern again and again. I want to make a shorts version as well as using the pants only without the bibs.
Sunday, March 10, 2019
Simplicity 1318 Times Two
Back in the Fall I placed an order with Stone Mountain Fabrics during a sale. I had my eye on a certain Ikat for a while but by the time I ordered it there was none left. They have the best customer service and offered to sell me another Ikat at the same sale price so I ended up with this gorgeous blue and white fabric from India. I only ordered a yard and a half but was able to squeeze this Haori style jacket out of that yardage.
I started this project back before Christmas and on a whim I tried out Hong Kong seam binding with this bright fuchsia silk dupoini. This fabric was originally a pair of pants that my mom thrifted and this is the second piece that I have used it in for bias binding. My Papercut Flutter Blouse has a bit of bright contrast too thanks to those thrifted pants.
Even though the pop of color was super satisfying to me, I lost steam on this make for a while. I was kicking myself for taking such a simple sew and making it so much more labor intensive. In the end I am glad I did. Even though you don't see it from the outside, look how beautiful the guts of this little jacket are! Plus I challenged myself and learned a new technique. Since I prefer simple silhouettes I really think elevating my construction is where the challenge lies in sewing for me. If you are interested in learning how to bind your seams in this way Colette has a tutorial on Hong Kong Finish.
Those colors together make me so happy! Speaking of Happy Colors, are you following the #sewhappycolor challenge that Katie Kortman is hosting? Super bright colors are not always my cup of tea these days (besides these small doses), but this challenge got me inspired. I dyed fabric, cut a pattern and sewed a top all in one week. For a slow maker and procrastinator like me that is a big deal.
Speaking of procrastinating, my oldest friend Gretchen has a birthday six days after mine. She gives the best gifts, always something handmade and like a box of treasures and goodies. I was stumped last year on what to make her. I had planned to dye some fabric and make her a caftan. But I was too wishy washy on color and pattern and how to dye the fabric. Too much pressure, I guess, creating for such a talented woman. Eventually I showed her my ikat jacket and she wanted me to make her the same pattern out of this beautiful Kokka double gauze.
I dyed a little bit of lightweight cotton in a bright yellow for the facings to give it a pop of color and contrast. I also squeezed this version out of 1.5 yards.
I made my own tag because I don't like the ones that I had made. I need to come up with something that I really love.
Pattern: Simplicity 1318
View: B
Size: XS
Alterations:
Cut the back pattern piece on the fold.
Leave off the bands on the sleeves.
Shorten body and sleeves in order cut from 1.5 yards.
I started this project back before Christmas and on a whim I tried out Hong Kong seam binding with this bright fuchsia silk dupoini. This fabric was originally a pair of pants that my mom thrifted and this is the second piece that I have used it in for bias binding. My Papercut Flutter Blouse has a bit of bright contrast too thanks to those thrifted pants.
Even though the pop of color was super satisfying to me, I lost steam on this make for a while. I was kicking myself for taking such a simple sew and making it so much more labor intensive. In the end I am glad I did. Even though you don't see it from the outside, look how beautiful the guts of this little jacket are! Plus I challenged myself and learned a new technique. Since I prefer simple silhouettes I really think elevating my construction is where the challenge lies in sewing for me. If you are interested in learning how to bind your seams in this way Colette has a tutorial on Hong Kong Finish.
Those colors together make me so happy! Speaking of Happy Colors, are you following the #sewhappycolor challenge that Katie Kortman is hosting? Super bright colors are not always my cup of tea these days (besides these small doses), but this challenge got me inspired. I dyed fabric, cut a pattern and sewed a top all in one week. For a slow maker and procrastinator like me that is a big deal.
Speaking of procrastinating, my oldest friend Gretchen has a birthday six days after mine. She gives the best gifts, always something handmade and like a box of treasures and goodies. I was stumped last year on what to make her. I had planned to dye some fabric and make her a caftan. But I was too wishy washy on color and pattern and how to dye the fabric. Too much pressure, I guess, creating for such a talented woman. Eventually I showed her my ikat jacket and she wanted me to make her the same pattern out of this beautiful Kokka double gauze.
I dyed a little bit of lightweight cotton in a bright yellow for the facings to give it a pop of color and contrast. I also squeezed this version out of 1.5 yards.
I made my own tag because I don't like the ones that I had made. I need to come up with something that I really love.
Pattern: Simplicity 1318
View: B
Size: XS
Alterations:
Cut the back pattern piece on the fold.
Leave off the bands on the sleeves.
Shorten body and sleeves in order cut from 1.5 yards.
Sunday, February 17, 2019
My Magic Lander Pants
I can't tell you how thrilled I am to finally have these Lander pants/magic overalls be a reality! I had seen a few versions of this shape of overall or jumpsuit last Fall and I finally got around to making this idea happen. I had planned to have these finished by the end of January for the Sew Fancy Pants contest but I'm slow and I was taking my time, and drafting the bib and top stitching and so on. But they are done now, and aren't they freaking fantastic?!
I had made a pair of Lander Shorts last summer that I love. However I like my pants much more fitted than my shorts. I ended up taking them in 1/4" at the side seams, except through the hip and I drafted a curved waistband, which I will use for any future versions of this pattern. I also took 1/2 wedge out of the center back seam where it meets the waistband. This eliminated the swayback.
I used the tutorial from SewNorth on instagram to figure out how to attach my two bib pieces. The waist band has an extra layer of fabric to protect it from the buttons and the inside waist band has button holes. This worked out great and now I have a party trick where I can remove the top half of these overalls and have plain 'ol pants.
The only downside to this is that I think between the extra layer of fabric and the buttons they fit a little tighter when the bib is buttoned on.
I'm learning so much about my body from sewing pants. I always thought of myself as "short waisted". My waist is very close to my bust. In my mind I assumed that my waist to crotch length would also be short, but now I think I have a high waist. I have seen the Lander pants sit at some peoples true waist without alterations. Even with lowering the crotch after they were all put together I think these need another 1" to 1.5" to sit at my true waist. Next time I make this pattern I will add that length. Right now they are just a tiny bit uncomfortable where they are sitting. While that could be frustrating, this is by far the best fitting pair of pants that I have made so far and I am hoping they will stretch enough to make them comfy.
I'm super proud of the top stitching on these pants. When I got my new Bernina last Fall I really thought it would handle top stitching thread easily, but that was not the case. I now use my triple stitch and it works so well! I can't get enough of top stitching, so I am really happy to have an option that works without the headache of thread nests that come along with proper top stitching thread. I highly recommend trying the triple stitch if your machine has that setting.
Planning and drafting the bib portion really took some thinking. I started with a triangle shape but that angled straight up to my neck. I pinched enough out of the side to see what the angle should look like and went from there. It was all very intuitive. I did about 5 drafts and muslins before I cam up with this shape and I'm thrilled with the results. I can totally envision having a skirt with this bib attached as well.
Lander Pants
Fabric: Robert Kauffman Ventana Twill in Brick Brown from Fancy Tiger Crafts (3 yards)
Adjustments:
I'm not totally sure now where these end up on the Lander pattern size wise. I need to retrace my pattern pieces with my new pants adjustments and see.
Cut 4 at front waist and 6 at back waist, tapering out to an 8 at the hips
Took in 1/4" off side seams except at hip
Took 1/2 wedge out of the center back seam where it meets the waistband.
Low butt and Round pubis adjustments
Lowered crotch slightly after putting them all together (next time I will add 1-1.5" to crotch length)
Drafted curved waistband
Measurements:
34 Bust
26 Waist
38 Hip
I realized this past week that my last three sewing projects have been extremely labor intensive and tedious. I still need to share the other two of those. I think I need a palate cleanser, and now would probably be a good time to work on my plan of sewing more projects with knit fabrics.
I had made a pair of Lander Shorts last summer that I love. However I like my pants much more fitted than my shorts. I ended up taking them in 1/4" at the side seams, except through the hip and I drafted a curved waistband, which I will use for any future versions of this pattern. I also took 1/2 wedge out of the center back seam where it meets the waistband. This eliminated the swayback.
I used the tutorial from SewNorth on instagram to figure out how to attach my two bib pieces. The waist band has an extra layer of fabric to protect it from the buttons and the inside waist band has button holes. This worked out great and now I have a party trick where I can remove the top half of these overalls and have plain 'ol pants.
The only downside to this is that I think between the extra layer of fabric and the buttons they fit a little tighter when the bib is buttoned on.
I'm learning so much about my body from sewing pants. I always thought of myself as "short waisted". My waist is very close to my bust. In my mind I assumed that my waist to crotch length would also be short, but now I think I have a high waist. I have seen the Lander pants sit at some peoples true waist without alterations. Even with lowering the crotch after they were all put together I think these need another 1" to 1.5" to sit at my true waist. Next time I make this pattern I will add that length. Right now they are just a tiny bit uncomfortable where they are sitting. While that could be frustrating, this is by far the best fitting pair of pants that I have made so far and I am hoping they will stretch enough to make them comfy.
I'm super proud of the top stitching on these pants. When I got my new Bernina last Fall I really thought it would handle top stitching thread easily, but that was not the case. I now use my triple stitch and it works so well! I can't get enough of top stitching, so I am really happy to have an option that works without the headache of thread nests that come along with proper top stitching thread. I highly recommend trying the triple stitch if your machine has that setting.
Planning and drafting the bib portion really took some thinking. I started with a triangle shape but that angled straight up to my neck. I pinched enough out of the side to see what the angle should look like and went from there. It was all very intuitive. I did about 5 drafts and muslins before I cam up with this shape and I'm thrilled with the results. I can totally envision having a skirt with this bib attached as well.
Lander Pants
Fabric: Robert Kauffman Ventana Twill in Brick Brown from Fancy Tiger Crafts (3 yards)
Adjustments:
I'm not totally sure now where these end up on the Lander pattern size wise. I need to retrace my pattern pieces with my new pants adjustments and see.
Cut 4 at front waist and 6 at back waist, tapering out to an 8 at the hips
Took in 1/4" off side seams except at hip
Took 1/2 wedge out of the center back seam where it meets the waistband.
Low butt and Round pubis adjustments
Lowered crotch slightly after putting them all together (next time I will add 1-1.5" to crotch length)
Drafted curved waistband
Measurements:
34 Bust
26 Waist
38 Hip
I realized this past week that my last three sewing projects have been extremely labor intensive and tedious. I still need to share the other two of those. I think I need a palate cleanser, and now would probably be a good time to work on my plan of sewing more projects with knit fabrics.
Friday, February 1, 2019
Pattern Release: Off Color Tunic
I am so excited to finally be able to share the Off Color Tunic, a brand new pattern from Sew and Tell Patterns that I was a pattern tester for last Fall.
This pattern is written for woven fabrics, but the designer gave me the go ahead to test it out in knits. I used a cotton knit with minimal stretch that I dyed with turmeric (my first try at that) and some leftover Leah Duncan knit from my Plantain Tee.
The pattern has a ton of ease. I made the XS and it measures 49" at the bust. That is the smallest size available. For my next version I plan to make a longer dress length in woven fabrics but I think I will take it up at the shoulder seam. You can see above that the armhole is quite wide and if you look straight in you can see my bra. This version is for lounging at home, so that is ok but on a dress I will need to alter that. I also have plans to add pockets to the angled front seams on my dress version.
I love the style lines of this pattern. It is a clever design where the back pattern piece wraps around to the front. I like the kimono sleeves with cuffs and the option to do so many variations with color blocking.
I love the graphics and thought that have been put into the virtual packaging by this designer. I feel like her branding is very strong and it makes the pattern instructions more fun than I am used to. This particular pattern has three versions, allowing you to color block the front only like I did, or the front and back, or to do a solid tunic.
Fair warning, this pattern takes up a ton of paper, 56 pages to be exact. I think it could have saved a lot of space by having the solid back and front options cut on the fold. Regrettably I re-printed the final draft to see what changes were made. Lengthen and shorten lines were added, a feature which I am happy to see but I don't think anything was changed in the drafting. I do plan to lengthen my next version and while I'm sure the lines will be helpful there is nothing in the instructions about how to do so across all the angled pieces. I will definitely have to experiment with that. I would consider this tunic an intermediate pattern even though the style lines are pretty simple.
Jen has offered a 20% discount off of her new patterns from February 1-7 with the code MINDFULMAKER20
This pattern is written for woven fabrics, but the designer gave me the go ahead to test it out in knits. I used a cotton knit with minimal stretch that I dyed with turmeric (my first try at that) and some leftover Leah Duncan knit from my Plantain Tee.
The pattern has a ton of ease. I made the XS and it measures 49" at the bust. That is the smallest size available. For my next version I plan to make a longer dress length in woven fabrics but I think I will take it up at the shoulder seam. You can see above that the armhole is quite wide and if you look straight in you can see my bra. This version is for lounging at home, so that is ok but on a dress I will need to alter that. I also have plans to add pockets to the angled front seams on my dress version.
I love the style lines of this pattern. It is a clever design where the back pattern piece wraps around to the front. I like the kimono sleeves with cuffs and the option to do so many variations with color blocking.
I love the graphics and thought that have been put into the virtual packaging by this designer. I feel like her branding is very strong and it makes the pattern instructions more fun than I am used to. This particular pattern has three versions, allowing you to color block the front only like I did, or the front and back, or to do a solid tunic.
Fair warning, this pattern takes up a ton of paper, 56 pages to be exact. I think it could have saved a lot of space by having the solid back and front options cut on the fold. Regrettably I re-printed the final draft to see what changes were made. Lengthen and shorten lines were added, a feature which I am happy to see but I don't think anything was changed in the drafting. I do plan to lengthen my next version and while I'm sure the lines will be helpful there is nothing in the instructions about how to do so across all the angled pieces. I will definitely have to experiment with that. I would consider this tunic an intermediate pattern even though the style lines are pretty simple.
Jen has offered a 20% discount off of her new patterns from February 1-7 with the code MINDFULMAKER20
Subscribe to:
Posts (Atom)